
First Hour After a Burst Pipe in a Houston Home
A split supply line, failed fitting, or frozen pipe can put a lot of water on the floor in a few minutes. The first hour is about stopping the water, staying away from electricity, and recording what happened.
Stop the water
Close the main house shutoff. In many Houston-area homes it is in the garage, in a hall closet, or near the front hose bib; some homes only have a curb valve in the meter box at the street. If you are not sure, see our guide to finding the main shutoff. Then open a low faucet to drain pressure from the lines, and turn off the water heater if the leak is near it.
Houston does not freeze often, but Winter Storm Uri in February 2021 burst pipes across the region. Most of the year the usual causes are aging supply lines, water heaters and fittings. Either way, the shutoff steps are the same.
Stay safe around electricity
Only switch breakers off if you can reach the panel from a dry spot. If water is near outlets or the panel, stay out and call the utility or 911. Keep people and pets off wet floors around cords and appliances.
Document, then start drying
Photograph the failed pipe or fitting before it is replaced, and film every wet room. Move furniture off wet carpet if you can do it safely. EPA advises drying wet materials within 24 to 48 hours to help prevent mold growth. A plumber repairs the pipe; a water-damage business dries the structure. Some companies do both. Ask who is handling each part and check licenses: plumbing work in Texas requires a TSBPE-licensed plumber (tsbpe.texas.gov).
Need a match? Use the form on our burst pipe cleanup page.
Free referral to an independent the Houston area business. Requests accepted 24/7.
Sources and local resources
- EPA, A Brief Guide to Mold, Moisture and Your Home
- EPA, Flooded Homes
- Texas State Board of Plumbing Examiners
Sources checked November 19, 2026. Local rules change; confirm details with the agency.